Copying And Overwriting Qos Policies - Alcatel-Lucent 7210 SAS M OS Quality Of Service Manual

Copying and Overwriting QoS Policies

You can copy an existing service ingress policy, rename it with a new policy ID value, or overwrite
an existing policy ID. The
destination policy ID exists.
CLI Syntax: config>qos# copy {sap-ingress} source-policy-id dest-policy-id
[overwrite]
*A:ALU-7210>config>qos# info
#--------------------------------------------------
echo "QoS Policy Configuration"
#--------------------------------------------------
----------------------------------------------
*A:ALU-7210>config>qos#
7210 SAS M OS Quality of Service Guide
overwrite
sap-ingress 100 create
description "Used on VPN sap"
meter 1 create
exit
meter 2 multipoint create
exit
meter 10 create
rate cir 11000
exit
meter 11 multipoint create
exit
exit
sap-ingress 101 create
description "Used on VPN sap"
meter 1 create
exit
meter 2 multipoint create
exit
meter 10 create
rate cir 11000
exit
meter 11 multipoint create
exit
exit
sap-ingress 200 create
description "Used on VPN sap"
meter 1 create
exit
meter 2 multipoint create
exit
meter 10 create
rate cir 11000
exit
meter 11 multipoint create
exit
exit
Service Ingress QoS Policies
option must be specified or an error occurs if the
Page 295