Table 6: Default Network Qos Policy Of Type 'Port' Egress Marking - Alcatel-Lucent 7210 SAS M OS Quality Of Service Manual

QoS Overview
The required elements to be defined in a network QoS policy of port type are:
•
•
•
•
Optional network QoS policy elements include:
•
•
Network policy ID 1 is reserved as the default network QoS policy of type port. The default policy
cannot be deleted or changed.
The default network QoS policy is applied to all network ports which do not have another network
QoS policy explicitly assigned.
Table 6

Table 6: Default Network QoS Policy of type 'port' Egress Marking

FC-ID FC Name
7 Network
Control
6 High-1
5 Expedited
4 High-2
3 Low-1
Page 30
→ Remarking of QoS bits is always disabled
A unique network QoS policy ID and network-policy-type set to port.
Egress forwarding class to DSCP or Dot1p (or both) value mappings for each forwarding
class.
A default ingress forwarding class and in-profile/out-of-profile state.
At least one default unicast forwarding class meter. The parameters that can be configured
for a meter are discussed in Meter Parameters on page 25.
Additional unicast meters up to a total of 8.
A DSCP or Dot1p (or both) value to forwarding class and profile state mappings for all
DSCP or Dot1p values received.
lists the default mapping of forwarding class to Dot1p and DSCP values.
FC Label
nc nc2
h1 nc1
ef ef
h2 af41
l1 af21
Egress DSCP Marking
In-Profile Out-of-Profile
nc2
nc1
ef
af41
af22
7210 SAS M OS Quality of Service Guide
Egress Dot1p Marking
In-Profile Out-of-profile
111 - 7 111 - 7
110-6 110-6
101-5 101-5
100-4 100-4
011-3 010-2