Displaying The Far Site's Name When The Call Connects; Hearing Audio Confirmation When You Dial - Polycom VSX Series Getting Started Manual

G S G
ETTING TARTED UIDE FOR THE

Displaying the Far Site's Name When the Call Connects

Hearing Audio Confirmation When You Dial

38
VSX S
ERIES
4. Scroll to PIP, press
Select this setting...
Camera
Auto
On
Off
5. Press Home to save your change and return to the Place a Call
screen.
You can specify whether to display the far site's name when the call connects
and how long to leave the name on the screen.
To specify when to display the name of the far site:
1. Select System from the Place a Call screen.
2. Select User Settings from the System screen.
3. Select to see more settings.
4. Scroll to Far Site Name Display Time, press
display the far site's name during the entire call, for a specified time, or
not at all.
5. Press Home to save your change and return to the Place a Call
screen.
You can set up the system to speak each number as you enter it in the dialing
entry field on the Place a Call screen.
To enable audio confirmation:
1. Select System from the Place a Call screen.
2. Select User Settings from the System screen.
3. Select to see more settings.
, and select one of these settings:
To show the PIP...
When you press any of the camera control
buttons.
On connection and when you pick up the
remote control.
On connection and during the call.
Only when you press
control.
.
WWW POLYCOM
PIP on the remote
, and select to
. /
COM VIDEODOCUMENTATION