First Entry Configuration; Procedure 1: Product Registration; Obtain The Product Activation Key - Polycom RMX 2000 Getting Started Manual

Chapter 2-First Time Installation and Configuration

First Entry Configuration

Hardware
Installation
and
Setup
Gather Network
Equipment
and
Address Info
First Entry
Configuration

Procedure 1: Product Registration

2-6
There are four procedures necessary for setup of the new RMX. It is
important that they are performed in the following sequence:
1
Product Registration.
2
Modifying the Factory Default Management Network Settings.
3 First-time Power-up and connection to MCU.
4
Modifying the Default IP Service Settings (Fast Configuration
Wizard).
Before the RMX can be configured and used, it is necessary to register the
product and obtain a Product Activation Key.
During first-time power-up, a dialog box appears requesting you to enter
a Product Activation Key.

Obtain the Product Activation Key

1
Access the Support Page of the Polycom website:
www.polycom.com/support
2
In the Resource Center section, click the Register Your Product link.
3
If required, select New User Account or enter your User ID and
Password and then click Sign In.
4
Follow the on-screen instructions for Product Registration and Product
Activation. (The RMX's serial number is on a sticker on the back of the
unit, if needed.)
5
Write down the Product Activation Key or copy/paste it for later use.