Verifying The Configuration - HPE FlexNetwork 10500 Series Security Configuration Manual

[Switch-line-vty0-63] authentication-mode scheme
[Switch-line-vty0-63] quit
# Create a local device management user named client001.
[Switch] local-user client001 class manage
# Set the password to aabbcc in plain text for local user client001.
[Switch-luser-manage-client001] password simple aabbcc
# Authorize local user client001 to use the SSH service.
[Switch-luser-manage-client001] service-type ssh
# Assign the network-admin user role to local user client001.
[Switch-luser-manage-client001] authorization-attribute user-role network-admin
[Switch-luser-manage-client001] quit
# Create an SSH user named client001. Specify the service type as NETCONF and the
authentication method as password for the user.
[Switch] ssh user client001 service-type netconf authentication-type password

Verifying the configuration

# Verify that you can perform NETCONF operations after logging in to the switch. (Details not
shown.)
462