Configuration Procedure; Verifying The Configuration - HPE FlexFabric 5940 Series Configuration Manual

Figure 6 Network diagram

Configuration procedure

# Add a static MAC address entry for MAC address 000f-e235-dc71 on Ten-GigabitEthernet 1/0/1
that belongs to VLAN 1.
<Device> system-view
[Device] mac-address static 000f-e235-dc71 interface ten-gigabitethernet 1/0/1 vlan 1
# Add a blackhole MAC address entry for MAC address 000f-e235-abcd that belongs to VLAN 1.
[Device] mac-address blackhole 000f-e235-abcd vlan 1
# Set the aging timer to 500 seconds for dynamic MAC address entries.
[Device] mac-address timer aging 500

Verifying the configuration

# Display the static MAC address entries for Ten-GigabitEthernet 1/0/1.
[Device] display mac-address static interface ten-gigabitethernet 1/0/1
MAC Address
000f-e235-dc71
# Display the blackhole MAC address entries.
[Device] display mac-address blackhole
MAC Address
000f-e235-abcd
# Display the aging time of dynamic MAC address entries.
[Device] display mac-address aging-time
MAC address aging time: 500s.
VLAN ID State
1 Static
VLAN ID State
1 Blackhole
Port/NickName
XGE1/0/1
Port/NickName
N/A
36
Aging
N
Aging
N