Enabling Web Authentication; Specifying A Web Authentication Domain; Setting The Redirection Wait Time - HPE FlexNetwork 10500 Series Security Configuration Manual
Hide thumbs
Also See for FlexNetwork 10500 Series:
- Security command reference (881 pages) ,
- Network management and monitoring command reference (423 pages) ,
- Configuration manual (407 pages)
Table of Contents
Advertisement
Enabling Web authentication
For Web authentication to operate correctly, do not enable port security or configure the port security
mode on the Layer 2 Ethernet interface enabled with Web authentication.
To enable Web authentication:
Step
1.
Enter system view.
2.
Enter interface view.
3.
Enable Web authentication
and specify the Web
authentication server
Specifying a Web authentication domain
This feature allows you to specify different authentication domains for Web authentication users on
different interfaces. After you specify a Web authentication domain on an interface, the device uses
the authentication domain for AAA of all Web authentication users on the interface, ignoring the
domain names carried in the usernames.
The device selects the authentication domain for a Web authentication user on an interface in this
order:
1.
The authentication domain specified for the interface.
2.
The authentication domain carried in the username.
3.
The system default authentication domain. For information about the default authentication
domain, see
To specify an authentication domain for Web authentication users on an interface:
Step
1.
Enter system view.
2.
Enter interface view.
3.
Specify an authentication
domain for Web
authentication users on the
interface.
Setting the redirection wait time
The redirection wait time determines the length of time that the device waits to redirect a user to the
specified webpage after the user passes Web authentication.
If a user is added to an authorization VLAN after passing Web authentication, the authentication
client might change its IP address automatically. To ensure that the redirection URL can be
successfully opened, set the redirection wait time to be greater than the time that the client takes to
update its IP address.
To set the redirection wait time:
Command
system-view
interface interface-type
interface-number
web-auth enable apply server
server-name
"Configuring
AAA."
Command
system-view
interface interface-type
interface-number
web-auth domain domain-name
596
Remarks
N/A
N/A
By default, Web authentication is
disabled.
Remarks
N/A
N/A
By default, no authentication
domain is specified for Web
authentication users.
Advertisement
Table of Contents
Troubleshooting
