HPE FlexNetwork 10500 Series Security Configuration Manual page 357

Step
3. (Optional.) Configure a
description for the IPsec
policy.
4. Specify an ACL for the
IPsec policy.
5. Specify an IPsec
transform set for the
IPsec policy.
6. Specify the remote IP
address of the IPsec
tunnel.
7. Configure an SPI for the
inbound or outbound
IPsec SA.
8. Configure keys for the
IPsec SA.
Command
description text
security acl { acl-number | name
acl-name }
transform-set
transform-set-name
remote-address ipv4-address
•
To configure an SPI for the
inbound IPsec SA:
sa spi inbound { ah | esp }
spi-number
•
To configure an SPI for the
outbound IPsec SA:
sa spi outbound { ah |
esp } spi-number
•
Configure an authentication
key in hexadecimal format
for AH:
sa hex-key authentication
{ inbound | outbound } ah
{ cipher | simple } string
•
Configure an authentication
key in character format for
AH:
sa string-key { inbound |
outbound } ah { cipher |
simple } string
•
Configure a key in character
format for ESP:
sa string-key { inbound |
outbound } esp { cipher |
simple } string
•
Configure an authentication
key in hexadecimal format
for ESP:
sa hex-key authentication
{ inbound | outbound } esp
{ cipher | simple } string
•
Configure an encryption key
in hexadecimal format for
ESP:
sa hex-key encryption
{ inbound | outbound } esp
{ cipher | simple } string
340
Remarks
By default, no description is configured.
By default, no ACL is specified for an
IPsec policy.
You can specify only one ACL for an
IPsec policy.
By default, no IPsec transform set is
specified for an IPsec policy.
You can specify only one IPsec
transform set for a manual IPsec policy.
By default, the remote IP address of the
IPsec tunnel is not specified.
The local IPv4 address of the IPsec
tunnel is the primary IPv4 address of the
interface to which the IPsec policy is
applied. The local IPv6 address of the
IPsec tunnel is the first IPv6 address of
the interface to which the IPsec policy is
applied.
By default, no SPI is configured for the
inbound or outbound IPsec SA.
By default, no keys are configured for
the IPsec SA.
Configure keys correctly for the security
protocol (AH, ESP, or both) you have
specified in the IPsec transform set
used by the IPsec policy.
If you configure a key in both the
character and the hexadecimal formats,
only the most recent configuration takes
effect.
If you configure a key in character
format for ESP, the device automatically
generates an authentication key and an
encryption key for ESP.