Setting User Group Password Control Parameters - HPE FlexNetwork 10500 Series Security Configuration Manual

Step
1. Enter system view.
2. Set the password expiration
time.
3. Set the minimum password
update interval.
4. Set the minimum password
length.
5. Configure the password
composition policy.
6. Configure the password
complexity checking policy.
7. Set the maximum number of
history password records for
each user.
8. Configure the login attempt
limit.
9. Set the number of days
during which a user is
notified of the pending
password expiration.
10. Set the maximum number of
days and maximum number
of times that a user can log in
after the password expires.
11. Set the maximum account
idle time.

Setting user group password control parameters

Step
1. Enter system view.
Command
system-view
password-control aging
aging-time
password-control update
interval interval
password-control length length
password-control composition
type-number type-number
[ type-length type-length ]
password-control complexity
{ same-character | user-name }
check
password-control history
max-record-number
password-control login-attempt
login-times [ exceed { lock |
lock-time time | unlock } ]
password-control
alert-before-expire alert-time
password-control
expired-user-login delay delay
times times
password-control login
idle-time idle-time
Command
system-view
270
Remarks
N/A
The default setting is 90 days.
The default setting is 24 hours.
•
In non-FIPS mode, the
default setting is 10
characters.
•
In FIPS mode, the default
length is 15 characters.
The following default settings
apply:
•
In non-FIPS mode, a
password must contain a
minimum of one character
type and a minimum of one
character for each type.
•
In FIPS mode, a password
must contain a minimum of
four character types and a
minimum of one character
for each type.
By default, the system does not
perform password complexity
checking.
The default setting is 4.
By default, the maximum number
of login attempts is 3 and a user
failing to log in after the specified
number of attempts must wait for
1 minute before trying again.
The default setting is 7 days.
By default, a user can log in three
times within 30 days after the
password expires.
The default setting is 90 days.
Remarks
N/A