Specifying A Mac Binding Server On An Interface - HPE FlexNetwork 10500 Series Security Configuration Manual

Step
1. Enter system view.
2. Create a MAC binding server
and enter its view.
3. Specify the IP address of the
MAC binding server.
4. (Optional.) Specify the
NAS-Port-Type value carried
in RADIUS requests sent to
the RADIUS server.
5. (Optional.) Set the UDP port
number on which the MAC
binding server listens for
MAC binding query packets.
6. (Optional.) Specify the
maximum number of
attempts and the interval for
sending MAC binding
queries to the MAC binding
server.
7. (Optional.) Specify the type
of the MAC binding server
8. (Optional.) Specify the
version of the portal protocol.
9. (Optional.) Specify the
timeout the device waits for
portal authentication to
complete after receiving the
MAC binding query
response.
10. (Optional.) Set the aging time
for MAC-trigger entries.

Specifying a MAC binding server on an interface

After a MAC binding server is specified on an interface, the device can implement MAC-based quick
portal authentication for portal users on the interface.
To specify a MAC binding server on an interface:
Step
1. Enter system view.
2. Enter interface view.
3. Specify a MAC binding
server on the interface.
Command
system-view
portal mac-trigger-server
server-name
ip ipv4-address [ vpn-instance
ipv4-vpn-instance-name ] [ key
{ cipher | simple } string ]
nas-port-type value
port port-number
binding-retry { retries | interval
interval } *
server-type imc
version version-number
authentication-timeout minutes
aging-time seconds
Command
system-view
interface interface-type
interface-number
portal apply mac-trigger-server
server-name
198
Remarks
N/A
By default, no MAC binder servers
exist.
By default, the IP address of a
MAC binding server is not
specified.
By default, the NAS-Port-Type
value carried in RADIUS requests
is 0.
By default, the MAC binding
server listens for MAC binding
query packets on UDP port
50100.
By default, the maximum number
of query attempts is 3 and the
query interval is 1 second.
By default, the type of a MAC
binding server is IMC.
By default, the version of the
portal protocol is 1.
By default, the portal
authentication timeout time is 3
minutes.
By default, the aging time for
MAC-trigger entries is 300
seconds.
Remarks
N/A
The interface must be a Layer 3
interface.
By default, no MAC binding server
is specified on an interface.