HPE FlexNetwork 10500 Series Security Configuration Manual page 42

Step
7. Specify the phone number of
the local guest.
8. Specify the email address of
the local guest.
9. Specify the sponsor name for
the local guest.
10. Specify the sponsor
department for the local
guest.
11. Specify the sponsor email
address for the local guest.
12. Configure the validity period
for the local guest.
13. Assign the local guest to a
user group.
14. Configure the local guest
status.
Configuring user group attributes
User groups simplify local user configuration and management. A user group contains a group of
local users and has a set of local user attributes. You can configure local user attributes for a user
group to implement centralized user attributes management for the local users in the group. Local
user attributes that are manageable include authorization attributes.
By default, every new local user belongs to the default user group system and has all attributes of
the group. To assign a local user to a different user group, use the group command in local user
view.
To configure user group attributes:
Step
1. Enter system view.
2. Create a user group and
enter user group view.
3. Configure authorization
attributes for the user
group.
Command
phone phone-number
email email-string
sponsor-full-name
name-string
sponsor-department
department-string
sponsor-email email-string
validity-datetime { from
start-date start-time to
expiration-date expiration-time |
from start-date start-time | to
expiration-date expiration-time }
group group-name
state { active | block }
Command
system-view
user-group group-name
authorization-attribute { acl
acl-number | idle-cut minutes |
ip-pool ipv4-pool-name | ipv6-pool
ipv6-pool-name | session-timeout
minutes | vlan vlan-id |
work-directory directory-name } *
25
Remarks
By default, no phone number is
specified for a local guest.
By default, no email address is
specified for a local guest.
The device sends email notifications
to this address to inform the guest of
the account information.
By default, no sponsor name is
specified for a local guest.
By default, no sponsor department is
specified for a local guest.
By default, no sponsor email
address is specified for a local
guest.
The device sends email notifications
to this address to inform the sponsor
of the guest information.
By default, a local guest does not
expire.
Expired guests cannot pass local
authentication.
By default, a local guest belongs to
the system-defined user group
system.
By default, a local guest is in active
state and is allowed to request
network services.
Remarks
N/A
By default, a system-defined
user group exists. The group
name is system.
By default, no authorization
attributes are configured for a
user group.