HPE FlexNetwork 10500 Series Security Configuration Manual page 35

No. Subattribute
26 Connect_ID
28 Ftp_Directory
29 Exec_Privilege
59 NAS_Startup_Timestamp
60 Ip_Host_Addr
61 User_Notify
62 User_HeartBeat
98 Multicast_Receive_Group
IP6_Multicast_Receive_G
100
roup
101 MLD-Access-Limit
102 local-name
103 IGMP-Access-Limit
104 VPN-Instance
105 ANCP-Profile
135 Client-Primary-DNS
136 Client-Secondary-DNS
144 Acct_IPv6_Input_Octets
145 Acct_IPv6_Output_Octets
146 Acct_IPv6_Input_Packets
Acct_IPv6_Output_Packe
147
ts
Acct_IPv6_Input_Gigawor
148
ds
Acct_IPv6_Output_Gigaw
149
ords
Description
Index of the user connection.
FTP, SFTP, or SCP user working directory.
When the RADIUS client acts as the FTP, SFTP, or SCP server, this
attribute is used to set the working directory for an FTP, SFTP, or SCP
user on the RADIUS client.
EXEC user priority.
Startup time of the NAS in seconds, which is represented by the time
elapsed after 00:00:00 on Jan. 1, 1970 (UTC).
User IP address and MAC address included in authentication and
accounting requests, in the format A.B.C.D hh:hh:hh:hh:hh:hh. A
space is required between the IP address and the MAC address.
Information that must be sent from the server to the client
transparently.
Hash value assigned after an 802.1X user passes authentication,
which is a 32-byte string. This attribute is stored in the user list on the
NAS and verifies the handshake packets from the 802.1X user. This
attribute only exists in Access-Accept and Accounting-Request
packets.
IP address of the multicast group that the user's host joins as a
receiver. This subattribute can appear multiple times in a multicast
packet to indicate that the user belongs to multiple multicast groups.
IPv6 address of the multicast group that the user's host joins as a
receiver. This subattribute can appear multiple times in a multicast
packet to indicate that the user belongs to multiple multicast groups.
Maximum number of MLD multicast groups that the user can join
concurrently.
L2TP local tunnel name.
Maximum number of IGMP multicast groups that the user can join
concurrently.
MPLS L3VPN instance to which a user belongs.
ANCP profile name.
IP address of the primary DNS server.
IP address of the secondary DNS server.
Bytes of IPv6 packets in the inbound direction. The measurement unit
depends on the configuration on the device.
Bytes of IPv6 packets in the outbound direction. The measurement unit
depends on the configuration on the device.
Number of IPv6 packets in the inbound direction. The measurement
unit depends on the configuration on the device.
Number of IPv6 packets in the outbound direction. The measurement
unit depends on the configuration on the device.
Bytes of IPv6 packets in the inbound direction. The measurement unit
is 4G bytes.
Bytes of IPv6 packets in the outbound direction. The measurement unit
is 4G bytes.
18