HPE FlexNetwork 10500 Series Security Configuration Manual page 237
Hide thumbs
Also See for FlexNetwork 10500 Series:
- Security command reference (881 pages) ,
- Network management and monitoring command reference (423 pages) ,
- Configuration manual (407 pages)
Table of Contents
Advertisement
Figure 66 Network diagram
20.20.20.1/24
Vlan-int2
8.8.8.1/24
Host
8.8.8.2/24
Configuration prerequisites and guidelines
•
Configure IP addresses for the switch and servers as shown in
host, switch, and servers can reach each other.
•
Configure the RADIUS server correctly to provide authentication and accounting functions.
•
Make sure the IP address of the portal device added on the portal server is the IP address
(20.20.20.1) of the switch's interface connecting the host. The IP address group associated with
the portal device is the subnet of the host (8.8.8.0/24).
Configuration procedure
Perform the following tasks on Switch A.
1.
Configure a RADIUS scheme:
# Create a RADIUS scheme named rs1 and enter its view.
<SwitchA> system-view
[SwitchA] radius scheme rs1
# Specify the primary authentication server and primary accounting server, and configure the
keys for communication with the servers.
[SwitchA-radius-rs1] primary authentication 192.168.0.112
[SwitchA-radius-rs1] primary accounting 192.168.0.112
[SwitchA-radius-rs1] key accounting simple radius
[SwitchA-radius-rs1] key authentication simple radius
[SwitchA-radius-rs1] user-name-format without-domain
# Enable RADIUS session control.
[SwitchA] radius session-control enable
# Specify a session-control client with IP address 192.168.0.112 and shared key 12345 in
plaintext form.
[SwitchA] radius session-control client ip 192.168.0.112 key simple 12345
2.
Configure an authentication domain:
# Create an ISP domain named dm1 and enter its view.
[SwitchA] domain dm1
# Configure AAA methods for the ISP domain.
[SwitchA-isp-dm1] authentication portal radius-scheme rs1
[SwitchA-isp-dm1] authorization portal radius-scheme rs1
[SwitchA-isp-dm1] accounting portal radius-scheme rs1
[SwitchA-isp-dm1] quit
Switch A
Vlan-int2
192.168.0.100/24
Vlan-int4
Vlan-int4
20.20.20.2/24
Switch B
Portal server
192.168.0.111/24
RADIUS server
192.168.0.112/24
Security policy server
192.168.0.113/24
220
Figure 66
and make sure the
Advertisement
Table of Contents
Troubleshooting
