Setting Local User Password Control Parameters - HPE FlexNetwork 10500 Series Security Configuration Manual

Step
2. Create a user group and
enter its view.
3. Configure the password
expiration time for the user
group.
4. Configure the minimum
password length for the user
group.
5. Configure the password
composition policy for the
user group.
6. Configure the password
complexity checking policy
for the user group.
7. Configure the login attempt
limit.

Setting local user password control parameters

Step
1. Enter system view.
2. Create a device
management user and enter
its view.
3. Configure the password
expiration time for the local
user.
4. Configure the minimum
password length for the local
user.
Command
user-group group-name
password-control aging
aging-time
password-control length length
password-control composition
type-number type-number
[ type-length type-length ]
password-control complexity
{ same-character | user-name }
check
password-control login-attempt
login-times [ exceed { lock |
lock-time time | unlock } ]
Command
system-view
local-user user-name class
manage
password-control aging
aging-time
password-control length length
271
Remarks
By default, no user groups exist.
For information about how to
configure a user group, see
"Configuring AAA."
By default, the password
expiration time of the user group
equals the global password
expiration time.
By default, the minimum
password length of the user group
equals the global minimum
password length.
By default, the password
composition policy of the user
group equals the global password
composition policy.
By default, the password
complexity checking policy of the
user group equals the global
password complexity checking
policy.
By default, the login-attempt
policy of the user group equals the
global login-attempt policy.
Remarks
N/A
By default, no local users exist.
Local user password control
applies to device management
users instead of network access
users.
For information about how to
configure a local user, see
"Configuring AAA."
By default, the setting equals that
for the user group to which the
local user belongs. If no expiration
time is configured for the user
group, the global setting applies to
the local user.
By default, the setting equals that
for the user group to which the
local user belongs. If no minimum
password length is configured for
the user group, the global setting
applies to the local user.