HPE FlexNetwork 10500 Series Security Configuration Manual page 228

[SwitchA] display portal interface vlan-interface 4
Portal information of Vlan-interface4
NAS-ID profile: Not configured
Authorization : Strict checking
ACL
User profile
IPv4:
Portal status: Enabled
Portal authentication method: Layer3
Portal web server: newpt
Authentication domain: Not configured
Pre-auth domain: Not configured
User-dhcp-only: Disabled
Pre-auth IP pool: Not configured
Max Portal users: Not configured
Bas-ip: 20.20.20.1
User Detection:
Action for server detection:
Server type
--
Layer3 source network:
IP address
Destination authenticate subnet:
IP address
IPv6:
Portal status: Disabled
Portal authentication method: Disabled
Portal web server: Not configured
Authentication domain: Not configured
Pre-auth domain: Not configured
User-dhcp-only: Disabled
Pre-auth IP pool: Not configured
Max Portal users: Not configured
Bas-ipv6: Not configured
User detection: Not configured
Action for server detection:
Server type
--
Layer3 source network:
IP address
Destination authenticate subnet:
IP address
A user can perform portal authentication by using the HPE iNode client or through a Web browser.
Before passing the authentication, the user can access only the authentication page
http://192.168.0.111:8080/portal. All Web requests from the user will be redirected to the
authentication page. After passing the authentication, the user can access other network resources.
: Disabled
: Disabled
Not configured
Server name
--
Mask
Mask
Server name
--
211
Action
--
Action
--
Prefix length
Prefix length