HPE FlexNetwork 10500 Series Security Configuration Manual page 278

NAS-ID profile
Dot1x-failure trap
Dot1x-logon trap
Dot1x-logoff trap
Intrusion trap
Address-learned trap
Mac-auth-failure trap
Mac-auth-logon trap
Mac-auth-logoff trap
Open authentication
OUI value list
GigabitEthernet1/0/1 is link-up
Port mode
NeedToKnow mode
Intrusion protection mode
Security MAC address attribute
Learning mode
Aging type
Max secure MAC addresses
Current secure MAC addresses
Authorization
NAS-ID profile
Free VLANs
Open authentication
# After users pass authentication, display MAC authentication information. Verify that
GigabitEthernet 1/0/1 allows multiple MAC authentication users to be authenticated.
[Device] display mac-authentication interface gigabitethernet 1/0/1
Global MAC authentication parameters:
MAC authentication
User name format
Username
Password
Offline detect period
Quiet period
Server timeout
Reauth period
Authentication domain
Online MAC-auth users
Silent MAC users:
MAC address
GigabitEthernet1/0/1 is link-up
MAC authentication
Carry User-IP
Authentication domain
Auth-delay timer
: Not configured
: Disabled
: Disabled
: Disabled
: Disabled
: Disabled
: Disabled
: Disabled
: Disabled
: Disabled
: macAddressElseUserLoginSecure
: NeedToKnowOnly
: NoAction
: Sticky
: Periodical
: 64
: 0
: Permitted
: Not configured
: Not configured
: Disabled
: Enabled
: MAC address in uppercase(XX-XX-XX-XX-XX-XX)
: mac
: Not configured
: 300 s
: 180 s
: 100 s
: 3600 s
: sun
: 3
VLAN ID From port
: Enabled
: Disabled
: Not configured
: Disabled
261
Port index