HPE FlexNetwork 10500 Series Security Configuration Manual page 632
Hide thumbs
Also See for FlexNetwork 10500 Series:
- Security command reference (881 pages) ,
- Network management and monitoring command reference (423 pages) ,
- Configuration manual (407 pages)
Table of Contents
Advertisement
# Use the display web-auth user command to display information about online users.
[Device] display web-auth user
Total online web-auth users: 1
User Name: userpt
MAC address: 6805-ca17-4a0b
Access interface: GigabitEthernet1/0/1
Initial VLAN: 14
Authorization VLAN: 3
Authorization ACL ID: N/A
Authorization user profile: N/A
2.
Verify that the printer can pass MAC authentication.
# Connect the printer to the network. (Details not shown.)
# Display information about online MAC authentication users.
[Device] display mac-authentication connection
Total connections: 1
Slot ID: 1
User MAC address: f07d-6870-725f
Access interface: GigabitEthernet1/0/1
Username: f07d6870725f
User access state: Successful
Authentication domain: triple
Initial VLAN: 14
Authorization untagged VLAN: 3
Authorization tagged VLAN: N/A
Authorization VSI: N/A
Authorization ACL ID: N/A
Authorization user profile: N/A
Authorization URL: N/A
Termination action: Default
Session timeout period: N/A
Online from: 2015/01/04 18:01:43
Online duration: 0h 0m 2s
3.
Verify that the 802.1X user can pass 802.1X authentication.
# On the 802.1X client, initiate 802.1X authentication and enter the correct username and
password. (Details not shown.)
# Display information about online 802.1X users.
[Device] display dot1x connection
Total connections: 1
Slot ID: 1
User MAC address: 7446-a091-84fe
Access interface: GigabitEthernet1/0/1
Username: userdot
User access state: Successful
Authentication domain: triple
IPv4 address: 3.3.3.2
Authentication method: CHAP
Initial VLAN: 14
615
Advertisement
Table of Contents
Troubleshooting
