HPE FlexNetwork 10500 Series Security Configuration Manual page 41

Step
10. (Optional.) Configure
password control
attributes for the local
user.
11. (Optional.) Assign the
local user to a user
group.
12. (Optional.) Configure
the validity period for
the local user.
Configuring local guest attributes
Create local guests and configure guest attributes to control temporary network access behavior.
Guests can access the network after passing local authentication. You can configure the recipient
addresses and email attribute information to the local guests and guest sponsors.
To configure local guest attributes:
Step
1. Enter system view.
2. Create a local guest and
enter local guest view.
3. Configure a password for the
local guest.
4. Configure a description for
the local guest.
5. Specify the name of the local
guest.
6. Specify the company of the
local guest.
Command
•
Set the password aging time:
password-control aging
aging-time
•
Set the minimum password
length:
password-control length
length
•
Configure the password
composition policy:
password-control
composition type-number
type-number [ type-length
type-length ]
•
Configure the password
complexity checking policy:
password-control
complexity
{ same-character |
user-name } check
•
Configure the maximum login
attempts and the action to
take if there is a login failure:
password-control
login-attempt login-times
[ exceed { lock | lock-time
time | unlock } ]
group group-name
validity-datetime { from start-date
start-time to expiration-date
expiration-time | from start-date
start-time | to expiration-date
expiration-time }
Command
system-view
local-user user-name class
network guest
password { cipher | simple }
string
description text
full-name name-string
company company-name
24
Remarks
By default, the local user uses password
control attributes of the user group to
which the local user belongs.
Only device management users support
the password control feature.
By default, a local user belongs to the
user group system.
By default, a local user does not expire.
You can configure validity periods only
for network access users.
Remarks
N/A
By default, no local guests exist.
By default, no password is
configured for a local guest.
By default, no description is
configured for a local guest.
By default, no name is specified for a
local guest.
By default, no company is specified
for a local guest.