HPE FlexNetwork 10500 Series Security Configuration Manual page 279

Periodic reauth
Re-auth server-unreachable : Logoff
Guest VLAN
Guest VLAN auth-period
Critical VLAN
Critical voice VLAN
Host mode
Offline detection
Authentication order
Guest VSI
Guest VSI auth-period
Critical VSI
Max online users
Authentication attempts
Current online users
MAC address
1234-0300-0011
1234-0300-0012
1234-0300-0013
# Display 802.1X authentication information. Verify that GigabitEthernet 1/0/1 allows only one
802.1X user to be authenticated.
[Device] display dot1x interface gigabitethernet 1/0/1
Global 802.1X parameters:
802.1X authentication
CHAP authentication
Max-tx period
Handshake period
Quiet timer
Quiet period
Supp timeout
Server timeout
Reauth period
Max auth requests
SmartOn supp timeout
SmartOn retry counts
EAD assistant function : Disabled
EAD timeout
Domain delimiter
Online 802.1X users
GigabitEthernet1/0/1
802.1X authentication
Handshake
Handshake reply
Handshake security
Unicast trigger
Periodic reauth
Port role
: Disabled
: Not configured
: 30 s
: Not configured
: Disabled
: Single VLAN
: Enabled
: Default
: Not configured
: 30 s
: Not configured
: 4294967295
: successful 3, failed 7
: 3
Auth state
Authenticated
Authenticated
Authenticated
: Enabled
: Enabled
: 30 s
: 15 s
: Disabled
: 60 s
: 30 s
: 100 s
: 3600 s
: 2
: 30 s
: 3
: 30 min
: @
: 1
is link-up
: Enabled
: Enabled
: Disabled
: Disabled
: Disabled
: Disabled
: Authenticator
262