HPE FlexNetwork 10500 Series Security Configuration Manual page 556
Hide thumbs
Also See for FlexNetwork 10500 Series:
- Security command reference (881 pages) ,
- Network management and monitoring command reference (423 pages) ,
- Configuration manual (407 pages)
Table of Contents
Advertisement
# Specify host as the role of the device attached to GigabitEthernet 1/0/1.
[DeviceB] interface gigabitethernet 1/0/1
[DeviceB-GigabitEthernet1/0/1] ipv6 nd raguard role host
[DeviceB-GigabitEthernet1/0/1] quit
# Specify router as the role of the device attached to GigabitEthernet 1/0/3.
[DeviceB] interface gigabitethernet 1/0/3
[DeviceB-GigabitEthernet1/0/3] ipv6 nd raguard role router
[DeviceB-GigabitEthernet1/0/3] quit
Verifying the configuration
# Verify that the device forwards or drops RA messages received on GigabitEthernet 1/0/2 based on
the RA guard policy. (Details not shown.)
# Verify that the device drops RA messages received on GigabitEthernet 1/0/1. (Details not shown.)
# Verify that the device forwards RA messages received on GigabitEthernet 1/0/3 to other ports in
VLAN 10. (Details not shown.)
539
Advertisement
Table of Contents
Troubleshooting
