Configure Port Security - HPE FlexNetwork 10500 Series Security Configuration Manual

[Device-radius-radsun] key accounting simple money
[Device-radius-radsun] timer response-timeout 5
[Device-radius-radsun] retry 5
[Device-radius-radsun] timer realtime-accounting 15
[Device-radius-radsun] user-name-format without-domain
[Device-radius-radsun] quit
# Configure ISP domain sun.
[Device] domain sun
[Device-isp-sun] authentication lan-access radius-scheme radsun
[Device-isp-sun] authorization lan-access radius-scheme radsun
[Device-isp-sun] accounting lan-access radius-scheme radsun
[Device-isp-sun] quit
2. Configure 802.1X:
# Set the 802.1X authentication method to CHAP. By default, the authentication method for
802.1X is CHAP.
[Device] dot1x authentication-method chap
# Specify ISP domain sun as the mandatory authentication domain for 802.1X users on
GigabitEthernet 1/0/1.
[Device] interface gigabitethernet 1/0/1
[Device-GigabitEthernet1/0/1] dot1x mandatory-domain sun
[Device-GigabitEthernet1/0/1] quit
3.

Configure port security:

# Enable port security.
[Device] port-security enable
# Add five OUI values. (You can add up to 16 OUI values. The port permits only one user
matching one of the OUIs to pass authentication.)
[Device] port-security oui index 1 mac-address 1234-0100-1111
[Device] port-security oui index 2 mac-address 1234-0200-1111
[Device] port-security oui index 3 mac-address 1234-0300-1111
[Device] port-security oui index 4 mac-address 1234-0400-1111
[Device] port-security oui index 5 mac-address 1234-0500-1111
# Set the port security mode to userLoginWithOUI.
[Device] interface gigabitethernet 1/0/1
[Device-GigabitEthernet1/0/1] port-security port-mode userlogin-withoui
[Device-GigabitEthernet1/0/1] quit
Verifying the configuration
# Verify that GigabitEthernet 1/0/1 allows only one 802.1X user to be authenticated.
[Device] display port-security interface gigabitethernet 1/0/1
Global port security parameters:
Port security
AutoLearn aging time
Disableport timeout
MAC move
Authorization fail
NAS-ID profile
Dot1x-failure trap
Dot1x-logon trap
Dot1x-logoff trap
: Enabled
: 30 min
: 30 s
: Denied
: Online
: Not configured
: Disabled
: Disabled
: Disabled
258