Setting User Group Password Control Parameters - HPE FlexFabric 7900 Series Security Configuration Manual

Step
7. Set the maximum number of
history password records for
each user.
8. Configure the login attempt
limit.
9. Set the number of days
during which a user is
notified of the pending
password expiration.
10. Set the maximum number of
days and maximum number
of times that a user can log in
after the password expires.
11. Set the maximum account
idle time.

Setting user group password control parameters

Step
1. Enter system view.
2. Create a user group and
enter user group view.
3. Configure the password
expiration time for the user
group.
4. Configure the minimum
password length for the user
group.
5. Configure the password
composition policy for the
user group.
6. Configure the password
complexity checking policy
for the user group.
7. Configure the login attempt
limit.
Command
password-control history
max-record-num
password-control login-attempt
login-times [ exceed { lock |
lock-time time | unlock } ]
password-control
alert-before-expire alert-time
password-control
expired-user-login delay delay
times times
password-control login
idle-time idle-time
Command
system-view
user-group group-name
password-control aging
aging-time
password-control length length
password-control composition
type-number type-number
[ type-length type-length ]
password-control complexity
{ same-character | user-name }
check
password-control login-attempt
login-times [ exceed { lock |
lock-time time | unlock } ]
54
Remarks
The default setting is 4.
By default, the maximum number
of login attempts is 3 and a user
failing to log in after the specified
number of attempts must wait for
1 minute before trying again.
The default setting is 7 days.
By default, a user can log in three
times within 30 days after the
password expires.
The default setting is 90 days.
Remarks
N/A
By default, no user group exists.
For information about how to
configure a user group, see
"Configuring AAA."
By default, the password
expiration time of the user group
equals the global password
expiration time.
By default, the minimum
password length of the user group
equals the global minimum
password length.
By default, the password
composition policy of the user
group equals the global password
composition policy.
By default, the password
complexity checking policy of the
user group equals the global
password complexity checking
policy.
By default, the login-attempt
policy of the user group equals the
global login-attempt policy.