HP FlexFabric 5950 series Configuration Manual page 425

[SwitchA-Vlan-interface103] ipv6 pim dm
[SwitchA-Vlan-interface103] quit
# Enable IPv6 multicast routing, MLD, and IPv6 PIM-DM on Switch B and Switch C in the same
way Switch A is configured. (Details not shown.)
# On Switch D, enable IPv6 multicast routing, and enable IPv6 PIM-DM on each interface.
<SwitchD> system-view
[SwitchD] ipv6 multicast routing
[SwitchD-mrib6] quit
[SwitchD] interface vlan-interface 300
[SwitchD-Vlan-interface300] ipv6 pim dm
[SwitchD-Vlan-interface300] quit
[SwitchD] interface vlan-interface 103
[SwitchD-Vlan-interface103] ipv6 pim dm
[SwitchD-Vlan-interface103] quit
[SwitchD] interface vlan-interface 101
[SwitchD-Vlan-interface101] ipv6 pim dm
[SwitchD-Vlan-interface101] quit
[SwitchD] interface vlan-interface 102
[SwitchD-Vlan-interface102] ipv6 pim dm
[SwitchD-Vlan-interface102] quit
Verifying the configuration
# Display IPv6 PIM information on Switch D.
[SwitchD] display ipv6 pim interface
Interface
Vlan300
Vlan103
Vlan101
Vlan102
# Display IPv6 PIM neighboring relationship on Switch D.
[SwitchD] display ipv6 pim neighbor
Total Number of Neighbors = 3
Neighbor
FE80::A01:101:1 Vlan103
FE80::B01:102:2 Vlan101
FE80::C01:103:3 Vlan102
# Send an MLD report from Host A to join IPv6 multicast group FF0E::101. (Details not shown.)
# Send IPv6 multicast data from IPv6 multicast source 4001::100/64 to IPv6 multicast group
FF0E::101. (Details not shown.)
# Display IPv6 PIM multicast routing table information on Switch A.
[SwitchA] display ipv6 pim routing-table
Total 1 (*, G) entry; 1 (S, G) entry
NbrCnt HelloInt
0 30
0 30
1 30
1 30
Interface
DR-Pri DR-Address
1 FE80::A01:201:1
(local)
1 FE80::A01:201:2
(local)
1 FE80::A01:201:3
(local)
1 FE80::A01:201:4
(local)
Uptime Expires Dr-Priority
00:04:00 00:01:29 1
00:04:16 00:01:29 3
00:03:54 00:01:17 5
415