Verifying The Configuration - HP FlexFabric 5950 series Configuration Manual

[SwitchA-vlan100] port hundredgige 1/0/1 to hundredgige 1/0/4
# Enable IGMP snooping and PIM snooping for VLAN 100.
[SwitchA-vlan100] igmp-snooping enable
[SwitchA-vlan100] pim-snooping enable
[SwitchA-vlan100] quit

Verifying the configuration

# On Switch A, display PIM snooping neighbor information for VLAN 100.
[SwitchA] display pim-snooping neighbor vlan 100
Total 4 neighbors.
VLAN 100: Total 4 neighbors.
10.1.1.1
Ports (1 in total):
HGE1/0/1
10.1.1.2
Ports (1 in total):
HGE1/0/2
10.1.1.3
Ports (1 in total):
HGE1/0/3
10.1.1.4
Ports (1 in total):
HGE1/0/4
The output shows that Router A, Router B, Router C, and Router D are PIM snooping neighbors.
# On Switch A, display PIM snooping routing entries for VLAN 100.
[SwitchA] display pim-snooping routing-table vlan 100
Total 2 entries.
FSM Flag: NI-no info, J-join, PP-prune pending
VLAN 100: Total 2 entries.
(*, 224.1.1.1)
Upstream neighbor: 10.1.1.1
Upstream Ports (1 in total):
HGE1/0/1
Downstream Ports (1 in total):
HGE1/0/3
Expires: 00:03:01, FSM: J
(*, 225.1.1.1)
Upstream neighbor: 10.1.1.2
Upstream Ports (1 in total):
HGE1/0/2
Downstream Ports (1 in total):
HGE1/0/4
Expires: 00:03:11, FSM: J
The output shows the following information:
(00:32:43)
(00:32:43)
(00:32:43)
(00:32:43)
61