Enabling Ipv6 Multicast Forwarding Between Sub-Vlans Of A Super Vlan; Displaying And Maintaining Ipv6 Multicast Routing And Forwarding - HP FlexFabric 5950 series Configuration Manual

Hide thumbs Also See for FlexFabric 5950 series:
Table of Contents

Advertisement

Step
1.
Enter system view.
2.
Enter interface view.
3.
Configure an IPv6 multicast
forwarding boundary.
Enabling IPv6 multicast forwarding between sub-VLANs of a
super VLAN
A super VLAN is associated with multiple sub-VLANs. Sub-VLANs are isolated with each other at
Layer 2. For information about the super VLAN and sub-VLANs, see Layer 2—LAN Switching
Configuration Guide.
To enable IPv6 multicast forwarding between sub-VLANs that are associated with a super VLAN:
Step
1.
Enter system view.
2.
Enter VLAN interface
view.
3.
Enable IPv6 multicast
forwarding between
sub-VLANs that are
associated with a super
VLAN.
4.
Delete all IPv6 multicast
forwarding entries with
super VLAN interface as
the incoming interface.
Displaying and maintaining IPv6 multicast routing
and forwarding
CAUTION:
The reset commands might cause IPv6 multicast data transmission failures.
Execute display commands in any view and reset commands in user view.
Task
Display information about the interfaces
maintained by the IPv6 MRIB.
Display IPv6 multicast boundary
Command
system-view
interface interface-type
interface-number
ipv6 multicast
boundary { ipv6-group-address
prefix-length | scope { scope-id
| admin-local | global
| organization-local | site-local } }
Command
system-view
interface
vlan-interface interface-number
ipv6 multicast forwarding supervlan
community
reset ipv6 multicast [ vpn-instance
vpn-instance-name ] forwarding-table
{ { ipv6-source-address [ prefix-length ]
| ipv6-group-address [ prefix-length ]
| incoming-interface { interface-type
interface-number } } * | all }
Command
display ipv6
mrib [ vpn-instance vpn-instance-name ] interface
[ interface-type interface-number ]
display ipv6
multicast [ vpn-instance vpn-instance-name ] boundary { gr
351
Remarks
N/A
N/A
By default, an interface is not an
IPv6 multicast forwarding
boundary for any IPv6 multicast
groups.
Remarks
N/A
N/A
By default, IPv6 multicast data
cannot be forwarded among
sub-VLANs that are associated
with a super VLAN.
N/A

Advertisement

Table of Contents
loading

Table of Contents