HP FlexFabric 5950 series Configuration Manual page 288

Hide thumbs Also See for FlexFabric 5950 series:
Table of Contents

Advertisement

[PE4] multicast routing
[PE4-mrib] quit
# Create service loopback group 1, and specify the multicast tunnel service for the group.
[PE4] service-loopback group 1 type multicast-tunnel
# Assign HundredGigE 1/0/4 to service loopback group 1. The interface does not belong to
VLAN 4, VLAN 13, or VLAN 14.
[PE4] interface hundredgige 1/0/4
[PE4-HundredGigE1/0/4] port service-loopback group 1
[PE4-HundredGigE1/0/4] quit
# Configure an LSR ID, and enable LDP globally.
[PE4] mpls lsr-id 1.1.1.4
[PE4] mpls ldp
[PE4-ldp] quit
# Create a VPN instance named a, and configure an RD and route targets for the VPN instance.
[PE4] ip vpn-instance a
[PE4-vpn-instance-a] route-distinguisher 100:1
[PE4-vpn-instance-a] vpn-target 100:1 export-extcommunity
[PE4-vpn-instance-a] vpn-target 100:1 import-extcommunity
[PE4-vpn-instance-a] quit
# Enable IP multicast routing for VPN instance a.
[PE4] multicast routing vpn-instance a
[PE4-mrib-a] quit
# Create an MD for VPN instance a.
[PE4] multicast-domain vpn-instance a
# Create an MD IPv4 address family for VPN instance a.
[PE4-md-a] address-family ipv4
# Specify the default-group, the MD source interface, and the data-group range for VPN
instance a.
[PE4-md-a-ipv4] default-group 239.1.1.1
[PE4-md-a-ivp4] source loopback 1
[PE4-md-a-ivp4] data-group 225.1.1.0 28
[PE4-md-a-ipv4] quit
[PE4-md-a] quit
# Create a VPN instance named b, and configure an RD and route targets for the VPN instance.
[PE4] ip vpn-instance b
[PE4-vpn-instance-b] route-distinguisher 200:1
[PE4-vpn-instance-b] vpn-target 200:1 export-extcommunity
[PE4-vpn-instance-b] vpn-target 200:1 import-extcommunity
[PE4-vpn-instance-b] quit
# Enable IP multicast routing for VPN instance b.
[PE4] multicast routing vpn-instance b
[PE4-mrib-b] quit
# Create an MD for VPN instance b.
[PE4] multicast-domain vpn-instance b
# Create an MD IPv4 address family for VPN instance b.
[PE4-md-b] address-family ipv4
# Specify the default-group, the MD source interface, and the data-group range for VPN
instance b.
278

Advertisement

Table of Contents
loading

Table of Contents