4.
Enter interface view.
5.
Enable MLD proxying.
Enabling IPv6 multicast forwarding on a non-querier interface
Typically, only MLD queriers can forward IPv6 multicast traffic and non-queriers cannot. This
prevents IPv6 multicast data from being repeatedly forwarded. If a router interface on the MLD proxy
failed the querier election, enable IPv6 multicast forwarding on the interface to forward IPv6 multicast
data to downstream receivers.
Configuration restrictions and guidelines
A shared-media network might have multiple MLD proxies, including one proxy acting as a querier.
To avoid duplicate IPv6 multicast traffic, do not enable IPv6 multicast forwarding on any of the
non-querier MLD proxies for the network.
Configuration procedure
To enable IPv6 multicast forwarding on a non-querier interface:
Step
1.
Enter system view.
2.
Enter interface view.
3.
Enable multicast forwarding on
the interface.
Configuring IPv6 multicast load splitting on an MLD proxy
This feature enables all proxy interfaces on an MLD proxy device to share IPv6 multicast traffic on a
per-group basis.
To enable IPv6 multicast load splitting on an MLD proxy:
Step
1.
Enter system view.
2.
Enter MLD view.
3.
Enable IPv6 multicast load
splitting on an MLD proxy.
Enabling MLD NSR
This feature backs up information about MLD interfaces and MLD multicast groups to the standby
process. The device recovers the information without cooperation of other devices when an
interface interface-type
interface-number
mld proxy enable
Command
system-view
interface interface-type
interface-number
mld proxy forwarding
Command
system-view
mld
[ vpn-instance vpn-instance-name ]
proxy multipath
367
N/A
By default, MLD proxying is
disabled.
Remarks
N/A
N/A
By default, IPv6 multicast
forwarding is disabled on a
non-querier interface.
Remarks
N/A
N/A
By default, IPv6 multicast load
splitting is disabled on an MLD
proxy, and only the proxy
interface with the highest IP
address forwards IPv6 multicast
data.