Table of Contents
Advertisement
Configuring the source IPv6 address for MLD messages in a VSI
Step
1.
Enter system view.
2.
Enter VLAN view.
3.
Configure the source IPv6
address for MLD general
queries.
4.
Configure the source IPv6
address for MLD
multicast-address-specific
queries.
5.
Configure the source IPv6
address for MLD reports.
6.
Configure the source IPv6
address for MLD dones.
Command
system-view
vsi vsi-name
mld-snooping general-query
source-ip ipv6-address
mld-snooping special-query
source-ip ipv6-address
mld-snooping report
source-ip ipv6-address
mld-snooping done
source-ip ipv6-address
301
current VLAN interface does not
have an IPv6 link-local address,
the source IPv6 address is
FE80::02FF:FFFF:FE00:0001.
Remarks
N/A
N/A
By default, the source IPv6
address of MLD general queries is
the IPv6 link-local address of the
gateway interface for a VSI. If the
gateway interface does not have
an IPv6 link-local address, the
source IPv6 address is
FE80::02FF:FFFF:FE00:0001.
By default, the source IPv6
address of MLD
multicast-address-specific
queries is one of the following:
•
The source address of MLD
general queries if the MLD
snooping querier of the VSI
has received MLD general
queries.
•
IPv6 link-local address of the
gateway interface for the VSI
if the MLD snooping querier
does not receive an MLD
general query.
•
FE80::02FF:FFFF:FE00:000
1 if the gateway interface
does not have an IPv6
link-local address.
By default, the source IPv6
address of MLD reports is the
IPv6 link-local address of the
gateway interface for a VSI. If the
gateway interface does not have
an IPv6 link-local address, the
source IPv6 address is
FE80::02FF:FFFF:FE00:0001.
By default, the source IPv6
address of MLD dones is the IPv6
link-local address of the gateway
interface for a VSI. If the gateway
interface does not have an IPv6
link-local address, the source
IPv6 address is
FE80::02FF:FFFF:FE00:0001.
Advertisement
Table of Contents
Troubleshooting
