Setting The Maximum Number Of Mld Snooping Forwarding Entries - HP FlexFabric 5950 series Configuration Manual

•
MLDv2 snooping can process MLDv1 and MLDv2 messages.
If you change MLDv2 snooping to MLDv1 snooping, the system performs the following actions:
•
Clears all MLD snooping forwarding entries that are dynamically created.
•
Keeps static MLDv2 snooping forwarding entries (*, G).
•
Clears static MLDv2 snooping forwarding entries (S, G), which will be restored when MLD
snooping is switched back to MLDv2 snooping.
For more information about static MLD snooping forwarding entries, see
You can specify the version for the specified VLANs in MLD-snooping view, for a VSI in VSI view, or
for a VLAN in VLAN view. For a VLAN, the configuration in VLAN view has the same priority as the
configuration in MLD-snooping view, and the most recent configuration takes effect.
Specifying an MLD snooping version in MLD-snooping view
Step
1. Enter system view.
2. Enable MLD snooping
globally and enter
MLD-snooping view.
3. Specify an MLD snooping
version for the specified
VLANs.
Specifying an MLD snooping version in VLAN view
Step
1. Enter system view.
2. Enter VLAN view or VSI
view.
3. Specify an MLD snooping
version for the VLAN or VSI.
Setting the maximum number of MLD snooping forwarding
entries
You can modify the maximum number of MLD snooping forwarding entries, including dynamic
entries and static entries. When the number of forwarding entries on the device reaches the upper
limit, the device does not automatically remove any existing entries. To allow new entries to be
created, remove some entries manually.
To set the maximum number of MLD snooping forwarding entries:
Step
1. Enter system view.
2. Enter MLD-snooping view.
3. Set the maximum number of
MLD snooping forwarding
entries.
Command
system-view
mld-snooping
version version-number vlan vlan-
list
Command
system-view
•
Enter VLAN view:
vlan vlan-id
•
Enter VSI view:
vsi vsi-name
mld-snooping
version version-number
Command
system-view
mld-snooping
entry-limit limit
292
"Configuring static
Remarks
N/A
N/A
The default setting is 1.
Remarks
N/A
N/A
The default setting is 1.
Remarks
N/A
N/A
The default setting is
4294967295.
ports."