Advertisement
Quick Links
Product End-of-Life Disassembly Instructions
Product Category: Networking Equipment
Marketing Name / Model
[List multiple models if applicable.]
HPE FF 5950 32Q28 Swch(JH321A)
HPE FF 5950 32Q28 TAA Swch(JH322A)
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions
for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU
directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
1.0Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
Item Description
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)
Batteries
Mercury-containing components
Liquid Crystal Displays (LCD) with a surface greater
than 100 sq cm
Cathode Ray Tubes (CRT)
Capacitors / condensers (Containing PCB/PCT)
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height
External electrical cables and cords
Gas Discharge Lamps
Plastics containing Brominated Flame
Retardantsweighing > 25 grams (not including
PCBs or PCAs already listed as a separate item
above)
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and toner
Components and waste containing asbestos
Components, parts and materials containing
refractory ceramic fibers
Components, parts and materials containing
radioactive substances
2.0 Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a point where components
and materials requiring selective treatment can be removed.
EL-MF877-00
Template Revision B
Notes
With a surface greater than 10 sqcm
All types including standard alkaline and lithium coin
or button style batteries
For example, mercury in lamps, display backlights,
scanner lamps, switches, batteries
Includes background illuminated displays with gas
discharge lamps
Include the cartridges, print heads, tubes, vent
chambers, and service stations.
Quantity
of items
included
in product
5
0
0
0
0
0
0
0
0
0
0
0
0
0
Page 1
Advertisement
Related Manuals for HP JH321A
Summary of Contents for HP JH321A
- Page 1 Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
- Page 2 Tool Description Tool Size (if applicable) Screw driver Socket wrench 2.5# 3.0 Product Disassembly Process 3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment: Unscrew the screws on mounting angle 1, and then remove mounting angle 1. Unscrew the screws on mounting angle 2, and then remove mounting angle 2.
- Page 3 Figure 1Remove mounting angleFigure 2 Rear of the product Figure 3Treatments to the productFigure 4Treatments to the product Figure 5 Treatments to fan-assembly 3Figure 6Treatments to PCB-assembly 11 EL-MF877-00 Page 3 Template Revision B...
- Page 4 Figure 7Treatments to PCB-assembly 14 3.3 Material of the facility built Facility Components Material Weight(g) Weight Selective treatment for Details percentage materials and components 3.57% recycling 0.76% recycling 0.25% recycling 0.10% Containing brominated flame retardants 0.25% recycling 0.99% Containing brominated flame retardants 0.25% recycling...
- Page 5 11-1 Complex The surface of PCB is greater 0.10% than 10 square centimeters; 11-2 Complex The surface of PCB is greater 1.99% than 10 square centimeters; Complex The surface of PCB is greater 2700 26.83% than 10 square centimeters; 0.29% recycling 14-1 Complex...