Sre - HP 1650B Programming Reference Manual

Note d
Command Syntax:
where:
Example:
HP 1650B/HP 16518
Programming Reference
(Service Request Enable)
The *SRE command sets the Service Request Enable Register bits. The
Service Request Enable Register contains a mask value for the bits to be
enabled in the Status Byte Register. A one in the Service Request Enable
Register will enable the corresponding bit in the Status Byte Register. A
zero will disable the bit. Refer to table 5-3 for the bits in the Service
Request Enable Register and what they mask.
The *SRE query returns the current value.
Refer to Appendix B for a complete discussion of status.
l
SRE c mask >
:: = integer from 0 to 255
OUTPUT XXX ; "*SRE 16"
This example forces the MSS bit high (see table 5-3).
command/query
Common Commands