Quality Of Experience Parameters - AudioCodes Mediant 500 E-SBC User Manual

Enterprise session border controller digital voip media gateway
Hide thumbs Also See for Mediant 500 E-SBC:
Table of Contents

Advertisement

User's Manual
Parameter
Web: IDS Policy Table
[IDSPolicy]
IDS Rule Table
Web: IDS Rule Table
[IDSRule]
IDS Match Table
Web: IDS Match Table
[IDSMatch]
53.5

Quality of Experience Parameters

The Quality of Experience (QoE) parameters are described in the table below.
Parameter
SEM Parameters
Web: Server IP
CLI: configure voip/qoe
configuration/server-ip
[QOEServerIP]
Redundant Server IP
CLI: configure voip > qoe
configuration > set
secondary-server-ip
Version 6.8
Defines IDS Policies.
The format of the ini file parameter is:
[ IDSPolicy ]
FORMAT IDSPolicy_Index = IDSPolicy_Name, IDSPolicy_Description;
[ \IDSPolicy ]
For a detailed description of this table, see ''Configuring IDS Policies'' on
page 147.
Defines rules for IDS Policies.
The format of the ini file parameter is:
[ IDSRule ]
FORMAT IDSRule_Index = IDSRule_Policy, IDSRule_RuleID,
IDSRule_Reason, IDSRule_ThresholdScope,
IDSRule_ThresholdWindow, IDSRule_MinorAlarmThreshold,
IDSRule_MajorAlarmThreshold, IDSRule_CriticalAlarmThreshold,
IDSRule_DenyThreshold, IDSRule_DenyPeriod;
[ \IDSRule ]
For a detailed description of this table, see ''Configuring IDS Policies'' on
page 147.
Defines target rules per IDS Policy.
The format of the ini file parameter is:
[ IDSMatch ]
FORMAT IDSMatch_Index = IDSMatch_SIPInterface,
IDSMatch_ProxySet, IDSMatch_Subnet, IDSMatch_Policy;
[ \IDSMatch ]
For a detailed description of this table, see ''Assigning IDS Policies'' on
page 151.
Table 53-29: Quality of Experience Parameters
Defines the IP address of AudioCodes primary Session Experience
Manager (SEM) server to where the quality experience reports are
sent.
Note: For this parameter to take effect, a device reset is required.
Defines the IP address of the secondary SEM server to where the
quality experience reports are sent. This is applicable when the
SEM/EMS server is in Geographical Redundancy HA mode.
Note: For this parameter to take effect, a device reset is required.
53. Configuration Parameters Reference
Description
Description
713
Mediant 500 E-SBC

Advertisement

Table of Contents
loading

Table of Contents