Panasonic 5000 Series Operating Instructions Manual page 237

MANAGER PROGRAMS
without requiring operator intervention.
1. Turn the keylock to MGR Mode.
2. Use this sequence to advance to the Self-Test menu.
5
3. Select the Tandem Test. Testing begins with the LCD Display Test, and continues
through all available self-tests, ending with the RAM tests.
1
4. Press CASH twice to return to the MGR Mode menu.
CASH
Repeat Tandem Test
Repeat Tandem is designed to aid your POS representative in initial testing and
troubleshooting. This test is not recommended for restaurant use, as it places the
workstation in a continuous self-testing mode. Each of the tests run, without stopping.
If you start this test, you can only stop it using the following procedure:
Make sure the keylock remains in MGR Position when power is restored. To power-up in
another keylock position may result in file damage.
Key in Data Dump
5-18
CASH 2
2 CASH
CASH
(Leave the keylock in MGR position)
Turn the workstation Power Switch OFF, then back ON.
0 CASH
Panasonic 5000 Version 4.0 Operating Instructions - Rev. 2.0
Self-Tests