Panasonic 5000 Series Operating Instructions Manual page 233

MANAGER PROGRAMS
This test works, in conjunction with the IRC Send Test, to check your workstation
communications. As a result, two workstations are involved in the test procedure. Use
this procedure to get one of the workstations ready to receive a communication signal.
1. Turn the keylock MGR Mode.
2. Enter this sequence to advance to the Self-Test menu.
5
3. Select the IRC Receive Test. Your screen advances to the menu shown here.
8
***
4. Leave this menu on your workstation. Go to another workstation and use the IRC
Send Test procedure described on the previous page.
5. After you finish the IRC Send test at the other workstation, return to this
workstation and press CASH twice to exit the test.
CASH
Time Clock
This Time Clock test is conducted during the factory manufacturing process to check the
5-14
CASH 2
CASH
IRC RX TEST
CASH
0
***
Panasonic 5000 Version 4.0 Operating Instructions - Rev. 2.0
CASH
Self-Tests