Panasonic 5000 Series Operating Instructions Manual page 34

Cashier Log-On & Log-Off
Coded Cashier Numbers
In many restaurants, cashiers log on with a code number. This log-on method saves space
on your keyboard and provides additional security. If you use this procedure, each cashier
is given a number, which is also programmed into the system. The number can be one to
seven digits. To log on, press the CSHR key, enter your cashier number, then press CSHR
again.
If "Call Manager" or a similar message displays, a manager must log on for you.
Employee Card Log-On
If you use the Magnetic Card Reader for log-on, each employee is issued an employee
card, which has an encoded number. When you are ready to log on, press the CSHR key.
Then run (or "swipe") your employee card through the reader.
CSHR
Cashier Log-Off
Log-off is not usually required. If a new cashier will operate this workstation, simply log
on the new cashier. If, no one will operate the workstation after you leave, or if you are
leaving the workstation for a period of time, you log-off with the following procedure:
Press the CSHR key. Enter zero (0). Press the CSHR key again.
Panasonic 5000 Version 4.0 Operating Instructions - Rev. 2.0
[ cashier # ]
CSHR
[ swipe card ]
CSHR 0
CSHR
CSHR
OPERATOR PROCEDURES
2-3