Program 32: Server File Programming - Panasonic 5000 Series Operating Instructions Manual

Server File

Program 32: Server File Programming

Use Program 32 to enter or change the names and log numbers of the servers who will be
using the system.
1. With the keylock in MGR position, enter this sequence to select the Server
program.
5
2. Enter the number (from the P33 worksheet) you are using for this server.
[ server # ]
Note: If you log on with the Coded Server # sequence (server #, SVR), this number serves
as the server's log number, and you need not follow Step 4.
PETER
3. If you are using the Secret Server Log-On procedure (SVR, server #, SVR), use the
next sequence to assign or change the server log number. You can use up to seven
digits for the number.
[ server log # ]
4. To change the server's name, press ALPHA SHIFT and enter the server name.
(You can use up to eight characters.)
Panasonic 5000 Version 4.0 Operating Instructions - Rev. 2.0
CASH 3
SRVR
0000000
SBTL
2 CASH
14:20 LVL1 P1
*** SRVR 19 ***
1 - 50 SRVR
(NAME) CASH
(CODE) SBTL
MANAGER PROGRAMS
5-43