Panasonic 5000 Series Operating Instructions Manual page 232

Self-Tests
IRC Send Test
Two tests are used to check communications between the workstations: IRC Send and IRC
Receive. The "Send" part of the test sends a communication to another workstation, which
has been set up to "Receive" the communication.
Note: Before you follow the procedure below, you must get another workstation ready to
receive the communication. Go to the receiving workstation, and follow the steps
described in the IRC Receive procedure. When the receiving workstation is ready,
follow the procedure below.
1. With the keylock MGR Mode, enter this sequence to go to the Self-Test menu.
5
2. Select the IRC Send Test. Your screen displays the menu shown below. The test
sends a communication signal to the workstation you set up to receive the signal.
An error message is displayed if the workstation is not correctly communicating or
if you have not set up a "receiving" workstation.
7
***
SEND
RECEIVING :
3. When you are ready to return to MGR Mode, press CASH twice.
CASH
IRC Receive Test
Panasonic 5000 Version 4.0 Operating Instructions - Rev. 2.0
CASH 2
CASH
IRC TX TEST ***
TX: OK
OK
CASH
0 CASH
MANAGER PROGRAMS
5-13