Panasonic 5000 Series Operating Instructions Manual page 45

OPERATOR PROCEDURES
Preset Scale PLU
Scale items with consistent pricing can be programmed with a preset price. If, for
example, you sell salad bar items by the pound (and the price is $1.60/lb. regardless of the
salad selections), you can have a preset Salad Bar key. To register the item, the system
multiplies the item weight by the preset price. Use the following procedure for Scale
PLUs with preset prices.
Place the item on the scale. When the weight has settled, press SCALE. Then press the
Preset PLU key. In the following example, the Salad Bar key is a preset Scale PLU.
[
place item on scale
Note: If the scale has not settled when you press the Preset PLU key, you see an error
message. This is because the workstation cannot get a reading of the weight it must
use to determine the item cost. Make sure the scale weight has settled before you
press the Preset PLU key.
The item price is based on the weight and the preset price per pound.
1 SALAD
SAM
DAVE
2-14
]
SCALE
3.47
SALAD
BAR
11:15 LVL1
TABLE
#003
TAX
TOTL
Panasonic 5000 Version 4.0 Operating Instructions - Rev. 2.0
Price Look-Ups
REG
#GST2
.13
3.60