Panasonic 5000 Series Operating Instructions Manual page 286

Employee Program
4 Job Code & Pay Rate 2
Job Code:
Pay Rate:
[ job code # ]
5 Job Code & Pay Rate 3
Job Code:
Pay Rate:
[ job code # ]
6 Job Code & Pay Rate 4
Job Code:
Pay Rate:
[ job code # ]
7 Status
Select options that apply to this employee. You can add the values, if
necessary.
1= Require a job code entry at each Clock-in. If not set, a job code entry is
optional, and the default job code (assigned in Job 1, above) is activated,
unless another job code is specified at clock-in.
2= Require a tip entry when this employee clocks out.
6. Repeat Steps 2 through 5 for each employee you must program or change.
7. To leave this program, press CASH twice.
CASH
Panasonic 5000 Version 4.0 Operating Instructions - Rev. 2.0
Use the first two digits of this field to list a second job code
this employee can use when they clock-in (if necessary).
Enter the pay rate number (from Program 56) associated with
the job code you entered in the first two digits of this field.
[ pay rate # ]
Use the first two digits of this field to list a third job code that
applies to this employee (if necessary).
Enter the pay rate number (from Program 56) associated with
the job code you entered in the first two digits of this field.
[ pay rate # ]
Use the first two digits of this field to list a fourth job code
that applies to this employee (if necessary).
Enter the pay rate number (from Program 56) associated with
the job code you entered in the first two digits of this field.
[ pay rate # ]
CASH
MANAGER PROGRAMS
CASH
CASH
CASH
5-67