Program 51: Kps Standard Menu - Panasonic 5000 Series Operating Instructions Manual

MANAGER PROGRAMS

Program 51: KPS Standard Menu

Program 51 is only required for systems using an optional Kitchen Video System with
KPS operating mode. If you are using a KPS mode video, use Program 51 to list the menu
items that display in the Standard Menu Zones. You can assign ten items to Zone 1. If
your video uses Dual Screen format, you can direct ten items to Zone 1 and ten additional
items to Zone 2.
Use Addresses 10 through 19 to display items in Standard Menu Zone 1. Use Address 20
through 29 to list Standard Menu Zone 2 items. Remember that you can only use Zone 2
if you have selected Dual Screen format for the KPS mode, as shown in the example
below.
1. With your keylock in MGR Mode, enter the following sequence to go to the KPS
Standard Menu program.
5
Note:
2. Enter the number of the Address line that holds the item you are assigning. Use
Addresses 10-19 for Zone 1 standard items. If your screen has two Standard Menu
Zones, you can also assign items in Addresses 20-29.
5-62
Kitchen Video Monitor
(Zone 1)
CASH 5
Referring to the P51 Worksheet (provided in the Worksheet Section of this
manual) helps you determine which addresses you use for the Standard
Menu Zone layout.
(Zone 2)
1 CASH
Panasonic 5000 Version 4.0 Operating Instructions - Rev. 2.0
KPS Standard Menu Program
Item Display
Area
Standard Menu
Zones