Panasonic 5000 Series Operating Instructions Manual page 150

MANAGER OPERATIONS
Note: The numbers to the right of the "R/P Steer", "KVS Mode", messages represent the
current settings for this program. You may want to make a note of the settings before
you make any changes.
5. Use the following procedure to change the Remote Printer Steering. Go to Step 6 if
you need to change the Kitchen Video Steering. The 12-digit positions listed beside
the R/P Steer message correspond to Steer Flags (S.F.) 6 through 1. In each
position, enter the 2-digit number of the printer or workstation to which the Steer
Flag is directed.
[ -- -- -- -- -- -- ]
A B C D E F
A - enter the Printer # for S.F. 6
B - enter the Printer # for S.F. 5
C - enter the Printer # for S.F. 4
Note: Enter '0' for any positions (A-F) you are not using. Enter 1-6 to direct the steer flag
to a printer number. If, for example, Steer Flag 1 should report to Printer 2, enter
'82' in the last position (F).
Enter 1-20 for Shared Printer (W/S #).
Enter 81-88 for Remote Printer (Printer #).
4-34
* REMOTE STEERING *
STEER#
R/P, S/P(ID)---
KVS MODE# ---
CASH
11:15 LVL1
** X1 PROGRAM **
6 5 4 3 2 1
00 00 00 00 00 00
0 0 0 0 0 0
D - enter the Printer # for S.F. 3
E - enter the Printer # for S.F. 2
F - enter the Printer # for S.F. 1
Panasonic 5000 Version 4.0 Operating Instructions - Rev. 2.0
X1 Mode Programs
MGR
CSHR