Turning Off Training Mode - Panasonic 5000 Series Operating Instructions Manual

MANAGER OPERATIONS
4. Press CASH to exit the Training Mode menu.
5. Turn your keylock back to REG Mode and remove the key.
CASH
Note: Any Cash Drawers or Remote Printers connected to this workstation may be disabled
in Training Mode.

Turning Off Training Mode

To leave Training Mode, use this procedure to resume normal REG Mode operations.
1. Make sure all training mode transactions and checks are closed before you start.
2. When all Training Mode transactions are finalized, turn the keylock to MGR Mode.
3. Select Training Mode. The Training Mode menu, shown here, is displayed.
Note: If "Enter Manager" displays, you must enter a valid manager number before you can
continue. (See Manager Log-on).
JOHN
4-6
4
0 REGISTER
1 TRAINING
CASH
11:15 LVL1
*** TRAINING ***
Panasonic 5000 Version 4.0 Operating Instructions - Rev. 2.0
Training Mode
MGR