Panasonic 5000 Series Operating Instructions Manual page 234

Self-Tests
16-Hz output. This test does not have a valid use for operators.
To test the internal workstation clock, you can use the alternate method below.
1. With the keylock in MGR Mode, enter this sequence to advance to the Date &
Time Program.
5
2. Enter the correct date in mmddyy format. (For example, January 1, 1993 =
010193.)
[ date ]
3. Enter the correct time in hhmm format.
[ time ]
Note: Hours are set with in military time (12:00 noon = 1200, 1:00 p.m. = 1300, 2:00 p.m.=
1400....11:00 p.m. = 2300, 12:00 midnight = 0000).
4. Exit the Date & Time program by pressing CASH twice.
CASH
5. Turn off the Power Switch. Leave the switch off for two to three minutes.
6. Turn on the workstation Power Switch and check the time. If the battery
backup circuit is defective, your time entry will be destroyed when the
power is removed.
RS-232C Test
The RS-232C test is primarily used by your POS representative to check the optional RS-
Panasonic 5000 Version 4.0 Operating Instructions - Rev. 2.0
CASH
3
CASH
SBTL
CASH
3 CASH
MANAGER PROGRAMS
5-15