Person - Panasonic 5000 Series Operating Instructions Manual

Person Number
RES

Person #

You can use the Person # key to separate items by person. This entry can help expediters
serve the order to the appropriate person. Or, in a guest check tracking environment, it
can allow you to separate the check total for each person in the party. This entry can be
optional or required, depending upon your programming.
To record the person number, enter the person number and press PERSON #. Enter the
items associated with this person. Enter the next person #, press PERSON #, then enter
the items associated with this person.
The person number displays above the items, as shown below.
PRSN 1
1 TOSS SAL
SAM
DAVE
Note: Your entry is limited by the number of guests you enter. If your system is set for true
person numbering, and you enter '2' for the number of guests, you can only enter
Person #1 and Person #2. If your system is set for "seat numbering", and you enter
'2' for the number of guests, you can use any two numbers.
If your entry is too low, or if additional guests join the party before the transaction
is finalized, you can increase the count (so you can increase the person numbers).
Enter the new number of guests and press the # GUEST key.
Panasonic 5000 Version 4.0 Operating Instructions - Rev. 2.0
[ ]
person #
3.15
PERSON [
items
#
11:15 LVL1
TABLE
#003
TAX
TOTL
OPERATOR PROCEDU
]
. . .
REG
#GST2
.19
3.34
2-9