Panasonic 5000 Series Operating Instructions Manual page 271

MANAGER PROGRAMS
2=
4=
Line 4: Status 3
A: 1=
2=
B: 1=
2=
4=
Line 5: Price
If this item is preset, enter the 6-digit item price ($.00 - $9999.99). If you
are programming an open PLU, enter the high amount limit ($.00 -
9999.99).
Line 6: Price 2
Line 7: Price 3
Line 8: Price 4
Line 9: Remote Steering
If this item should be relayed to a remote device (printer or video), select
applicable steer flags. If the item goes to more than one device, you can add
the values.
A: 1= Assign Steer Flag 4 to the item.
2= Assign Steer Flag 5 to the item.
4= Assign Steer Flag 6 to the item.
B: 1= Assign Steer Flag 1 to the item.
2= Assign Steer Flag 2 to the item.
4= Assign Steer Flag 3 to the item.
Note: You later direct these Steer Flags to a System Printer or KVS Monitor in the X1
Steering program.
Line 10: Coupons
Define the coupon number registered for this item upon depression of the
COUP1, COUP2, or COUP3 key. Use the coupon numbers from Program 36.
Cp3: Enter the 2-digit coupon # assigned to the COUP 3 key.
Cp2: Enter the 2-digit coupon # assigned to the COUP 2 key.
Cp1: Enter the 2-digit coupon # assigned to the COUP 1 key.
5-52
Disable Journal print.
Disable Slip print.
This item does not require a scale.
Require a scale.
This item has a GST Exception (Canada only).
Enable a Special Price PLU.
Enable Multiple Prices for this item.
Panasonic 5000 Version 4.0 Operating Instructions - Rev. 2.0
PLU Program