Program 53: Employee Program - Panasonic 5000 Series Operating Instructions Manual

Employee Program

Program 53: Employee Program

Use Program 53 to enter all information associated with employees who use the 5000
Series Time & Attendance functions (clock-in, clock-out, break). You can use this program
to enter information about new employees or to change information already entered for
existing employees. This information includes the employee's name, clock-in code, and up
to four job codes with their associated pay rates.
1. With the keylock in MGR Mode, use the following steps to select the Employee
Program.
5
2. Enter the number of the employee you need to program or change.
3. Press CSHR.
Note: The number of employees you can program is displayed below the program heading.
In the example below, numbers 1 through 100 are available.
[ employee # ]
1
2 0000000000
3 00-00
5 00-00
7 0
Note: The system displays the current selections for the employee number you entered. In
this example, the employee number has not yet been programmed.
4. Move the cursor to the line (1-7) you need. To do this, enter the line number.
Panasonic 5000 Version 4.0 Operating Instructions - Rev. 2.0
CASH 5
CSHR
4 00-00
6 00-00
3 CASH
02:59 LVL1 P1
** EMPL 1 **
1 - 100 CSHR
1 - 7 SBTL
(CODE) CASH
MANAGER PROGRAMS
5-65