Table of Contents
Advertisement
running a patient test until the EQC test has been successfully completed.
The instrument's default setting is daily. Use the following procedure to adjust the
setting based on your institution's preference:
From the main menu, enter
1.
the keypad to enter the Operator ID number at the prompt. Press the Tab key to
advance to the Password prompt to enter the password number.
Press the Maintenance
2.
Press the Parameter
3.
within the Maintenance section.
Figure 8-7 EQC Frequency
EQC Frequency
Press the Tab key 6 times to advance the cursor to the EQC Frequency setting.
4.
At the EQC Freq prompt, press either the (← ← ← ← ) or (→ → → → ) key to change the setting to
6 hours, 8 hours, 12 hours, daily, weekly, or monthly.
Press the Save
5.
menu. Press the Back
the changes.
Enable Printer
8.8
The VerifyNow printer is an optional accessory to the instrument. The printer enables
an operator to print assay results, QC results, and instrument usage statistics. To
enable the VerifyNow instrument to output this information to the printer, the printer
feature must be set to "Yes." Use the following procedure to configure the instrument
to support the printer accessory:
VerifyNow System User Manual
Operator ID and
key.
key. Refer to the Appendix for information on navigating
key to keep the new setting and return to the Maintenance
key twice to return to the Main Menu without saving
Page 80
INSTRUMENT SETTINGS - 8
Password, if required. Use
Save Setting
Back
14340.J
Hide quick links:
Advertisement
Table of Contents
