Electronic Quality Control Results Log - Accumetrics VerifyNow User Manual

From the main menu, enter
1.
the keypad to enter the Operator ID number at the prompt. Press the Tab key to
advance to the Password prompt to enter the password number.
Press the Maintenance
2.
Press the Next
3.
navigating within the Maintenance section.
Press the EQC
4.
See Section 7.2.1 for a description of the EQC results log or Section 7.2.2 for a
description of the WQC results log.
7.2.1

Electronic Quality Control Results Log

The cursor is positioned on the most recent assay result (Figure 7-4). Navigate within
an individual EQC test result using the (← ← ← ← , → → → → ) keys.
Figure 7-4 EQC Results Log
EQC Result
Operator ID
Date and Time
Parameters
Flagged
Parameter
Feature Description
EQC Result Displays the result as either a Pass (P) or Fail (F). A Pass result
indicates the instrument was operating within its specification
limits. If there was an earlier problem detected during the EQC
process, then a FAIL result would display.
Operator ID Displays the operator identification for the user who performed the
test (when configured).
Date and Time Displays the date and time by month, day, hour (24 hr clock
Stamp format), and minute using the following notation, "MMDD HHMM."
Parameter Displays the result for the following measured parameters:
VerifyNow System User Manual
Operator ID and
key.
key three times. Refer to the Appendix for information on
key or the WQC
Page 63
RETRIEVING TEST RESULTS - 7
Password, if required. Use
key to retrieve the appropriate results.
Print Result
Print All Results
Back
14340.J