Table of Contents
Advertisement
Figure 5-1 Main Menu
A flashing message will display while the instrument is warming up. During this
time the icon keys are inactive and you will be unable to start an assay. Go to the
next step when the warm-up message no longer displays.
From the main menu, enter
2.
the keypad to enter the Operator ID number at the prompt. Press the Tab key to
advance to the Password prompt to enter the password number.
Press the QC
3.
Figure 5-2 Start EQC
Remove the EQC device from the storage bay on the right side of the instrument.
4.
Open the cover and using the finger grip, insert the EQC device into the assay
device port until it clicks (Figure 5-3). The instrument will produce two audible
beeps. Close the cover to the assay port.
NOTE: Do not open the cover until the test has completed.
VerifyNow System User Manual
Operator ID and
key. Wait for the image of the device to display (Figure 5-2).
Page 27
QUALITY CONTROLS - 5
Password, if required. Use
14340.J
Hide quick links:
Advertisement
Table of Contents
