Software Icons - Accumetrics VerifyNow User Manual

Term Description
Wet quality Assay WQC measures two levels of turbidimetric signal that verify
control the dynamic range of the instrument. It verifies continued
performance by checking that actual results are within a standard
range.
WQC See wet quality control.
WQC kit A kit of 6 wet quality controls (for Level 1 or 2 WQC). Controls are
formulated at clinically relevant levels, and are individually
packaged in tubes (Level 1 and 2) and vials (Level 2).
11.5

Software Icons

The icons represent actions and prompt the operator during the activities to configure
the instrument, assay patient samples, perform quality control, and troubleshoot. The
following is a complete list of all screen icons and what each symbol represents:
Icon Name
Add/Update Record
Assay
Back
Backlight
Darken Contrast
Date and Time
Delete
Edit Record
VerifyNow System User Manual
Description
Select this icon to add an operator's log-in,
password, and authority information to the list.
Select this icon to begin a patient test.
Select this icon to return to the prior screen. If you
have made a change to an instrument setting, it will
return to the prior screen without saving changes.
Select this icon to toggle the backlight level for
viewing the display.
Select this icon to adjust the contrast level for
viewing the display.
Select this icon to change the date and time setting.
Select this icon to remove the highlighted (where
cursor is positioned) information from the setting.
When adding or changing operator information,
select this icon to add information to the operator
list.
Page 116
APPENDIX - 11
14340.J